Rockwell ICS Triplex T9110 单DO端子板

Rockwell ICS Triplex  T9110  单DO端子板
Rockwell ICS Triplex  T9110  单DO端子板


Rockwell ICS Triplex T9110单DO端子板在某些操作和环境条件下，数字输出模块电压轨之一可能会出现噪声。对这些电压轨进行采样，以确保它们在特定的公差范围内；但噪声偶尔会导致监控电路报告过电压，导致DO模块关闭。改进了内部滤波器，减少了噪音的影响，防止模块关闭。
罗克韦尔ICS Triplex T9110
这些规则适用于此版本：
T9110（和T9120）处理器和Workbench必须来自同一产品版本（即R1.33）。
工作台许可证：测试的版本是列表中的版本（在文档前面给出）。
可以使用AADvance Workbench许可证R1.2及更高版本；早期的许可证版本不兼容。
AADvance 1.33是AADvance1.3版本的增量版本。这
发行说明包括以下关于AADvance的信息
版本1.33：
此版本的硬件和软件构建
系统增强功能
已更正此版本中的问题和异常
仍然适用的限制
技术说明、产品通知和产品安全咨询
产品兼容性规则
技术支持和额外资源此版本中包含以下增强功能。
增加变量绑定内存变量绑定（KVB）内存的大小已增加从64 K增加到128 K。这将允许您增加可以在中的控制器之间设置的变量绑定应用
适用于5个用户、无限控制器的新Workbench许可证新的许可证选项T9084U可用：这是一个AADvance适用于5个用户的工作台许可证，数量不受限制控制器。它只能作为USB许可证选项使用：它可以工作使用Windows XP Service Pack 3；Windows Vista；Windows 7和32位和64位版本的Server 2003。
以下问题和异常情况已在本版本中得到纠正。
数字输出模块关闭在某些操作和环境条件下，噪音可能数字输出模块电压轨之一的存在。这些对电压轨进行采样，以确保它们在特定范围内容忍但噪声偶尔会导致监控电路报告过电压，导致DO模块关闭。改进了内部过滤器，减少了噪音并防止模块关闭。
I/O初始化已暂停-TN30051-01（回答id 544046）如果在控制器启动过程中发生I/O模块故障，则可能停止I/O初始化。因此，控制器启动过程未能完成，导致应用程序挂起。已经对控制器启动进行了更改，以防止出现这种情况防止发生。
48模块配置的系统通电AADvance支持的大I/O模块数控制器为48。某些配置，特别是当大多数是数字输出模块，可能导致系统电源循环后正确启动。控制器的更改已经进行了启动以防止这种情况发生。
处理器失去同步在双处理器配置中，在某些情况下是可能的两个处理器失去同步的条件，但是继续异步运行。尽管I/O仍然进入在故障保护模式下，任何绑定数据都可能不正确。已经对控制器进行了更改，以防止发生。
杂散软错误检测（SED）故障-TN30056-01（答案id:564815）
每个AADvance模块使用一个或多个FPGA来提供处理器和I/O之间的通信接口模块。AADvance中使用的FPGA的制造商发布了一个产品通知，标识此设备可以错误地生成SED错误。FPGA制造商已对控制器进行了建议的更改，以防止这种情况不会发生。
处理器在联机更新后失去同步有可能对超过37的大型系统进行在线更新安装的I/O模块可能会导致处理器丢失同步。已对控制器进行了更改防止这种情况发生。
SNCP内核变量绑定（KVB）通信丢失在某些条件下，双SNCP的两个链路都有可能绑定配置失败。已对控制器进行了更改为了防止这种情况发生
The Rockwell ICS Triplex T9110 high-density protection processor module may exhibit noise on one of the voltage rails of the digital output module under certain operating and environmental conditions.Sampling these voltage rails to ensure they are within a specific tolerance range;However,noise occasionally causes the monitoring circuit to report overvoltage,causing the DO module to shut down.Improved internal filter to reduce the impact of noise and prevent module shutdown.
Rockwell ICS Triplex T9110
These rules apply to this version:
The T9110(and T9120)processor and Workbench must be from the same product version(i.e.,R1.33).
Workbench License:The version tested is the version in the list(given in the front of the document).
The AAdvance Workbench license R1.2 and higher can be used;Incompatible earlier license versions.
AADvance 1.33 is an incremental version of AADvance 1.3.this
The release notes include the following information about AADvance
Version 1.33:
Hardware and software builds for this version
System enhancements
Problems and exceptions in this version have been corrected
Restrictions that still apply
Technical descriptions,product notifications,and product safety consulting
Product compatibility rules
Technical Support and Additional Resources The following enhancements are included in this release.
Increase variable binding memory The size of variable binding(KVB)memory has increased from 64 K to 128 K.This will allow you to add variable binding applications that can be set between controllers in
New Workbench license for 5 users,unlimited controllers New license option T9084U available:This is an AAdvanced Workbench license for 5 users,with an unlimited number of controllers.It can only be used as a USB license option:it can work using Windows XP Service Pack 3;Windows Vista；Windows 7 and 32-bit and 64-bit versions of Server 2003.
The following issues and anomalies have been corrected in this version.
Digital output module shutdown Under certain operating and environmental conditions,noise may be present on one of the voltage tracks of the digital output module.These samples the voltage rails to ensure they are tolerant within a specific range,but noise can occasionally cause the monitoring circuit to report overvoltage,causing the DO module to shut down.Improved internal filters to reduce noise and prevent module shutdown.
I/O initialization paused-TN30051-01(answer id 544046)If an I/O module failure occurs during controller startup,I/O initialization may stop.Therefore,the controller startup process failed to complete,causing the application to hang.Changes have been made to the controller startup to prevent this from happening.
The maximum number of I/O modules supported by the system powered up AAdvance controller for a 48 module configuration is 48.Certain configurations,especially when most are digital output modules,may cause the system to start correctly after a power cycle.Changes to the controller have been initiated to prevent this from happening.
Processor loss of synchronization In a dual processor configuration,it is possible for the two processors to lose synchronization under certain circumstances,but continue to run asynchronously.Although I/O is still in failsafe mode,any bound data may be incorrect.Changes have been made to the controller to prevent it from occurring.
Spurious Soft Error Detection(SED)fault-TN30056-01(answer id:564815)
Each AAdvance module uses one or more FPGAs to provide a communication interface module between the processor and I/O.The manufacturer of the FPGA used in AADvance has issued a product notification identifying that this device can incorrectly generate SED errors.The FPGA manufacturer has made recommended changes to the controller to prevent this from happening.
Loss of synchronization of a processor after an online update may result in an I/O module being installed for online updates on large systems exceeding 37.Changes have been made to the controller to prevent this from happening.
SNCP kernel variable binding(KVB)communication loss Under certain conditions,both links of a dual SNCP may fail to bind and configure.Changes have been made to the controller to prevent this from happening

其他相关型号：

ICS TRIPLEX	T9100		ICS TRIPLEX	T8310
ICS TRIPLEX	TC-801-02-4M5		ICS TRIPLEX	T8300
ICS TRIPLEX	TC-305-01-5M0		ICS TRIPLEX	T8231
ICS TRIPLEX	TC-303-01-2M0		ICS TRIPLEX	T8193
ICS TRIPLEX	TC-301-02-2M0		ICS TRIPLEX	T8191
ICS TRIPLEX	TC-215-01-6M5		ICS TRIPLEX	T8160
ICS TRIPLEX	TC-215-01-4M5		ICS TRIPLEX	T8151B
ICS TRIPLEX	TC-201-01-6M5		ICS TRIPLEX	T8110C
ICS TRIPLEX	TC-201-01-4M5		ICS TRIPLEX	T8110B
ICS TRIPLEX	T9481		ICS TRIPLEX	T8100
ICS TRIPLEX	T9451		ICS TRIPLEX	9852*4 cable
ICS TRIPLEX	T9432		ICS TRIPLEX	9852*4
ICS TRIPLEX	T9402		ICS TRIPLEX	9852*3 cable
ICS TRIPLEX	T9310-02 PN-175486		ICS TRIPLEX	9852*3
ICS TRIPLEX	T9310-02		ICS TRIPLEX	9852*2/9832*1
ICS TRIPLEX	T9110		ICS TRIPLEX	9852*1/9802*2 cable
ICS TRIPLEX	T8480C		ICS TRIPLEX	9852*1/9802*2
ICS TRIPLEX	T8461		ICS TRIPLEX	9852*1
ICS TRIPLEX	T8451		ICS TRIPLEX	9852*1/9802*2
ICS TRIPLEX	T8431C		ICS TRIPLEX	9832*3 cable
ICS TRIPLEX	T8431		ICS TRIPLEX	9832*2 cable
ICS TRIPLEX	T8403C		ICS TRIPLEX	9802*3 cable
ICS TRIPLEX	T8403		ICS TRIPLEX	9802*1/9852*2 cable
ICS TRIPLEX	T8314		ICS TRIPLEX	9802*3/9832*1 cable
ICS TRIPLEX	T8312-4		ICS TRIPLEX	151661 4013-2255
ICS TRIPLEX	T8311		ICS TRIPLEX	1433/09232486825